S-SITO 100

Tips for Applying Custom Stickers

Have you ever turned beautiful custom stickers into a twisted clump or a wrinkled eyesore? It sometimes happens because of being unaware of the sticker application process. Applying custom stickers can seem complicated initially, but it’s easy for you to decorate any surface, from cars to laptops to windows, if you follow the right steps.

Custom stickers offer a personalized feel which can further represent your individuality or your business. Of course, it’s a pleasure to add creativity to accessories for daily use. All these come in various colors and styles so that you can choose one of your liking. Also, you can choose according to the surface you are going to past your custom stickers. However, it would be best to ensure a steady hand and apply it correctly whatever the surface.

Tips For Applying Custom Stickers

First, you need to check the surface you’re working with. It can be anything from laptops to car trunks. Also, make sure that the surface is smooth with any consistency, and it is advisable to identify the flatness of a surface because it can make viewable bumps.

Applying custom stickers begins with how you position them. Take an overview look at where you want the custom sticker to be. Hold the sticky part down once you pinpoint a specific area as you slowly peel off the cover.

Here are some tips and tricks that easily apply your custom stickers with ease.

  • Choose A Flat Surface

No one wants to apply custom stickers with bad results. So, you must choose suitable surfaces when placing them. It’s best to choose a smooth surface like glass on vehicles, windows, laminated doors, or flat wood surfaces. A huge indicator of an acceptable surface is a glossy enamel.

  • Clean The Surface

Grab a water-soaked towel or baby wipe and clear away any wax, dust, and debris from the surface of your accessory or other transparent areas. Try to get the surface as smooth and clean as possible, so no dust or grime adheres to your custom stickers later on. Pre-wash the place where you’ll be applying the custom sticker using either soap and water or a mixture of rubbing alcohol (70% isopropyl alcohol) and water. Always a 50/50 water/alcohol solution is recommendable! Rinse thoroughly with water after cleaning with soapy water until no soap or remainder lasts. Also, avoid using window-cleaning products as they may leave a rest behind, making your custom sticker cling less effectively.

  • Avoid Applying In Extreme Temperature

Use a room-specific thermometer to examine how hot or cool your accessory or sticker exterior is on an ordinary day. Ideally, the environment shouldn’t be too hot or cold, or the custom sticker might not adhere properly. In case your space doesn’t have to be this exact temperature, you need to try to keep it in a cool place. Suppose your garage or home gets especially cold or hot for an extended time. In that case, you might consider placing your sticker elsewhere. For example, stick it in a shaded area away from direct sunlight for the best results. Moreover, prefer when temperatures are above 50F and below 90F.

  • Use Masking Tape

Masking tape can help ensure that your custom sticker is precisely positioned where you desire it. Parting the white backing paper in place and facing the exterior you’re applying it to, set the custom stickers where you want them to go. Place a masking tape along the top edge of the sticker; this fixes it in the proper location. Then, lift it as if it’s on a hinge and take off the backing paper. While griping onto the bottom edge, slowly lower the custom sticker, utilizing the thumb of your other hand to hold down from the center out and gradually work your way from top to bottom.

  • Use The Wet Method

You can apply smaller custom stickers without water. Still, this trick is a life-saver for significant custom stickers. Once you clean your surface area, wet the area again using a spray bottle and a solution of about 5% soap / 95% water. Apply them to the wet spot; this will keep it from sticking immediately and allow you to reposition it if necessary. It also removes any bubbles using a plastic card or a squeegee. The soapy water will dry quickly, leaving your sticker affixed firmly.

  • Tend To The Transfer Tape

Before applying the custom stickers, it’s essential to ensure the sticker and transfer tape are pressed rigidly together. You need to apply pressure evenly across the transfer tape with a plastic card or a squeegee. It will ensure that the sticker doesn’t come up with the backing paper during installation. Also, once you’ve applied your custom sticker, leave the transfer tape in place for a minimum of 3 hours and a maximum of up to 24 hours before gently removing it. You may need to leave the transfer tape on even longer in the icy winter months. You can warm the application surface using a blow dryer on low heat to speed up the process when it’s cold out.

Conclusion

Custom stickers are in trend these days. These stickers look so unique and beautiful on the accessories. The custom stickers’ designs, shapes, and variety look fantastic and give you many options. With the above tricks, you’ll be able to apply the custom stickers very smoothly. The process will be easy; even you will get the perfect finishing of the custom stickers after applying them. All of the tips and methods

will help you get the desired look of the custom stickers.

Open the chat
Do you need help?
Hi how can I help you?